Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
tube and shell heat exchangers suppliers
01-21-2019, 04:03 AM,
Post: #1
tube and shell heat exchangers suppliers
BR0.3Plate-type Heat Exchanger


1.Technical Data
Heat exchanging area of one plate:  0.308 m2
Space between plates: 4.3 mm
Cross­sectional area of one flow passage:  0.00118 m2
Maximum disposal volume:  120 m³/h
Whole length of flange::  80 DN mm  
Working temperature:  ≤150  ℃
Working pressure:  0.6, 1.0, 1.25 Mpa
Diameter of angle holes: 80 mm


Line graph of heat coefficient-speed(water-water)

Graph of pressure decrease -speed


2.BR0.3Parameter
outside size of plate(mm) 1135×370×0.6 normal ripple pitch(mm) 15
effective heat exchanging area(m2) 0.308 width of flow passage(mm) 320
weight of one plate(kg) 1.95 average space between plates(mm) 4.3
diameter of angle hole(mm) Ф80 average crossed sectional area(m2) 0.00118
height of ripple(mm) 3.7 average equivalent diameter(mm) 7.0
form of ripple isosceles triangle material of plate 304 316 316L
Ti



3.Installing Size of BR0.3

                                                        Floor-type                     Hanging type


B=370  C=1135  F=145  E=224  H=1245  B1=460  DN≤80 PN1.0


Heat exchanging area (m2) 12 15 18 20 22 25 28 30 35 40 45 50
Plate number (sheet) 40 50 60 67 74 84 94 100 117 134 150 167
L (mm) 172 215 258 288 318 361 404 430 503 576 645 718
D (mm) 532 575 618 648 678 721 764 790 863 936 1005 1078
A1(mm) 352 395 438 468 498 541 584 610 683 756 825 898
Weight (kg) 435 458 483 499 515 540 564 578 619 659 696 736
A2 (mm) 835 890 950 990 1025 1080 1140 1180 1280 1370 1470 1570



4. Notice for Order
a. According to the different requirements of customers, our joint pipe flange isdivided into carbon steel and rustless steel. So be sure to write the specification models of heat exchanger and the material of joint pipe and flange clearly.
b.Sealed pads we provide are usually oil-proofed rubber pad. We can provide pads with special material according to special requirements. Now we mainly produce nitrile rubber pad, triple ethylene propylene rubber pad, chloroprene rubber pad and sanitation pad in four colors: black, white, orange and green.
c.The flow of the equipment can be arranged according to customers’s requirements. If the customers cannot choose type and calculate, we can provide the service of calculating and arranging flow and heat exchanger area. tube and shell heat exchangers suppliers
website:http://www.jiankai-chem.com/heat-exchangers/
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)