Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
PVC Foam Sheet manufacturers
07-24-2018, 05:01 AM,
Post: #1
PVC Foam Sheet manufacturers
Product DescriptionPVC TRIM BOARD
BOTO Flat PVC trim board  can be sealed edges based on your requirement.BOTO trim board can be easily installed and processed with standard wood woking tools, saving you time and labor costs. It’s moisture and insect resistant, doesn’t require paint for protection, and suitable for ground and masonry contact. Our trimboards can be ordered either Smooth/Smooth or Smooth/Timber, available on thick 3/8'', 1/2'', 5/8'', 3/4'', 1'', width 2 1/2”, 3 1/2”, 4 1/2” ,5 1/2” , 7 1/4”, 9 1/4”, 11 1/4” , length is flexible.
Features  Easy to work with, sealed edges available.
Low weight, high-cell density.
Water, moisture and termite proof, fire retardant.
Can be cut, nailed, drilled, glued, painted just like wood.
No need to be painted unless desired. When use outdoor, painting is recommended for maintaining color consistency for  long time.
ApplicationPVC trim board are widely used in house interior and exterior decoration.
Installation Guide
Cuttiing
BOTO Exterior Trim and Moulding products can be cut using the same tools used to cut lumber.Carbide tipped blades designed to cut wood work well. Avoid using fine tooth metal cutting blades.
Drilling
BOTO Exterior Trim and Moulding products can be drilled using the same tools used to drill lumber. Drilling BOTO Trim and Moulding products is similar to drilling a hardwood. Care should be taken to avoid frictional heat build-up.
Nailing
BOTO Exterior Trim and Moulding products can be nailed using the same tools used to drill lumber. Nailing BOTO Trim and Moulding products is similar to drilling a hardwood.
PackingBOTO plastics provide several packing for sheet, trim board and mouldings, to make sure the goods are perfectly protected and easy for loading & unloading.
PVC TRIM BOARD PACKING
PVC MOULDING PACKING
Certification
ISO9001
ISO14001
SGS Heavy and Phthalate test
Company Profile
About BOTO
Production areas and warehouse cover 100,000sqm.
Total 29 extrusion lines, shortest lead time.
Monthly output reaches 5000Tonnes
Top brand facilities Cincinnati Extruders produce top quality products.
Raw material auto-mixing system ensure consistent quality.
Advantage-BOTO Facility
Best Extruder Cincinnati from Austria
Raw material auto-mixing system introduced from Germany
Strict lab check for every batch of raw material
FAQ
- What types of fasteners can I use with BOTO Moulding and Trim Board?
You will want to use the same fasteners you would use for installing wood, standard nail guns work well with BOTO Moulding and trim board. IMPORTANT: Staples, brads, and wire nails should never be used. These products have shanks that are too small in diameter to control the thermal expansion and contraction properties of BOTO Moulding and trim board.
- Do I need to paint BOTO Moulding and Trim Board?
BOTO Moulding and Trim Board usually do not require paint for protection, but may be painted to achieve a custom color or to cover nail holes that have been filled.
- Can BOTO Moulding and Trim Board be used in structural application?
No, BOTO Moulding and Trim Board cannot be used in structural applications. BOTO Moulding and Trim Board products can only be used as the decorative part of your application; either wood or metal structural components need to be incorporated for structural applications. Check with your architect or builder if your application is structural.
- What can I use to fill nail holes in BOTO Moulding and Trim Board?
Acrylic caulk, Polyurethane/urethane caulk, Auto body Bondo and Vinyl spackle/painter’s putty may be used for filling trim nail holes.
For more specification, kindly send enquiry to [email protected]
Or browse our website:www.botoplastics.comPVC Foam Sheet manufacturers
website:http://www.boto-plastics.com/
website2:http://www.boto-plasticsru.com/
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)