Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Factors affecting the output of ultrafine mill
05-04-2020, 05:18 AM,
Post: #1
Factors affecting the output of ultrafine mill
In the process of using the ultrafine mill, sometimes low output occurs, so people began to pay attention to the problem of output. But to solve the problem of output, it is necessary to know which factors are related to output, because only know how to suffer from the disease can be treated in time. So, what are the factors that affect the ultrafine mill?
The main factors affecting the output of ultrafine mill:
The output factor of ultrafine mill is one: the hardness of the material being ground. The harder the material, the more difficult the ultrafine mill mill works, and the more serious the wear on the machine.
Factor two of the output of ultrafine mill: the humidity of the material, that is, when the moisture contained in the material is large, the material is easy to adhere in the ultrafine powder mill, and it is also easy to block during the conveying process of the material, which has a great impact on the output.
The output factor of ultrafine mill is three: the required fineness of the material. The higher the fineness requirement, that is, the finer the material from the ultrafine mill, the smaller the ultrafine mill capacity.
Factor 4 of output of ultrafine mill: the composition of the material, the more fine powder contained in the material before ultrafine mill, the more it affects the output of the ultrafine mill machine. Because the fine powder is easy to adhere and affect the transportation, it will have a certain impact on the output. Therefore, if the content of fine powder is large, it should be screened in advance.
Factor 5 of output of ultrafine mill: viscosity of material. The greater the viscosity of the material, the easier it is to adhere, which in turn affects the output.
Factor 6 of output of ultrafine mill: the better the wear resistance of the ultrafine mill parts (hammer head, jaw plate) of the ultrafine mill machine, the greater the mill capacity of the ultrafine mill. mill ability.
After understanding these "causes" that lead to a reduction in the output of ultrafine mill, we need to make improvements in the following areas.
1. Fineness: Users should determine the fineness requirements of finished products according to different production. It should be crushed as little as possible under the possible conditions to increase the output of the mill.
2. Material properties: The materials added to the ultrafine mill must have certain humidity and hardness requirements, and must meet the standards, so as to increase the output of the ultrafine mill.
3. Wearing parts: The quality of the mill roller and mill ring is an important factor affecting the output of the ultrafine mill. The better the quality of the accessories of the ultrafine mill, the more sufficient the production of the material and the higher the production efficiency. Therefore, when choosing equipment, pay attention to choosing equipment with good quality of wearing parts.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)